The CG2-11G and CG2-11S hand pipe cutter machine are both models of chain-type beveling machines. However, they are designed with different sizes, and suitable for different diameter’s pipe cutting. Here’s a comparison of these two models:
Same Structure with Same Functions
Components: The CG2-11G and CG2-11S are manual pipe gas cutting machines. They are supplied with a main aluminum body, 1pcs cutting torch assembly, 1 set of 75pcs 2.2m chains and 3pcs propane or acetylene cutting tips. The chain belt can be added or reduced according to the real diameter of the pipe.
Functionality: They are designed for cutting straight and beveled edges on pipes, with a focus on precision and control. The bevel angle of cutting is I. Y.V 45°and cutting speed is controlled by hand.
Hand-Operated: They are manually operated, making it independent of power sources, which is beneficial for on-site work where electricity may not be readily available.
Cost-Effective: Typically more affordable than more complex machines, making it a good choice for businesses looking for cost-effective solutions.
Fuel Gas Compatibility: It can work with different types of fuel gases, such as acetylene, propane, or natural gas, depending on the cutting requirements and available resources.
Application: This CG2-11G and CG2-11S portable chain type beveling machines are applicable for the seamless steel tube cutting, bevel cutting for industries, like petroleum, chemical industry, boiler, electric power generation, ship manufacture, building, motor vehicle, bridge building and so on. They’re suitable for outdoors work, other places without power supply as well as large OD pipe.
Key Differences of These Two Hand Pipe Cutter Machines
The acceptable minimum diameter of CG2-11G hand pipe cutter machine is 150mm, if want to cut bigger pipe, change to CG2-11S chain-type beveling machine which is suitable for 250mm diameter pipe.
| Model No. | Power Supply | Cutting thickness(mm) | Cutting Speed (mm/min) | Dia. Of. Circle Cutting(mm) | Dimension |
| CG2-11G | NO Need | 6-50 | Hand-control | ＞Φ150 | 420x280x450 |
| CG2-11S | NO Need | 6-50 | Hand-control | ＞Φ250 | 515x370x510 |
Conclusion
The CG2-11G and CG2-11S hand pipe gas cutting machines are a chain-type beveling machines, which are practical and efficient tools for pipe cutting tasks, especially favored in situations where simplicity, portability, and direct control are important. When deciding between the CG2-11G and CG2-11S, consider the specific requirements of your cutting tasks. If you need a machine for heavy-duty, precise cuts, especially on large or thick pipes, the CG2-11S would be more appropriate. If you’re looking for a more basic, easy-to-use machine for general pipe cutting tasks, the CG2-11G would be a better choice.
