Portable CO2 Gas Shielded Corner Welding Carriage HUAWEI HK-6A

  • Item No.: HK-6A
  • Material: High strength aluminum
  • Supply Voltage: AC220V/50HZ
  • Welding Speed: 150-800mm/min
  • Method of Driving: Rubber wheel four-wheel drive
  • Dimension: 310X260X270mm

GET INSTANT QUOTE


    FEATURES

    Product Details

    Descrição

    The HUAWEI HK-6A portable corner welding carriage is a co2 shielded auto-welding trolley. It consists of the car body,  control wire, fitting parts, fuse, hex-angular screw and other components. This MIG welding carriage is with small volume, light weight and stable welding, which is easy for movements and installation, and can deliver vertical angle welding and horizontal angle welding, and suitable for welding of cross section of reinforcing stimulus.

    Standard Corner Welding Carriage
    Standard Corner Welding Carriage

    This welding trolley can be used with semiautomatic(CO2/MAG)welding machine(power and feeder).

    ( Illustration:The only signal is welding torch switch signal, which make the trolley

    connected to welding machine. Because the signal, which the trolley supply to welding machine, is  normal  open  signal  and there  must  be  stump  in welding  process.  So you  must  make the retracting arc switch be on“No Self-Holding position.

    The model number of plug of signal wire is E”-25-2P. (It can connect feeders of

    Panasonic company or Osaka Company. If connect other feeder device, you may modify a little. You must make  (1)welding conducting wire,  (2)gas hosepipe,  (3)torch

    connected to feeder device. According to brand of power, the plug may be different.

    Specifications:

    1.Item No.: HK-6A
    2.Driving method Four rubber rims driving
    3.Hauling power 16    Kg
    4.Running speed 150~~1500 (mm/min)
    5.Tracking mode Guide wheel type
    6.Height of torch Three chooses
     

    7.Adjusting scope of torch

    Horizontal angle: 40°~55° Up /down moving: 45mm    Front/rear moving: 45mm
    8.Torch Bent welding torch or straight welding torch
    9.Locked equipment of torch Suit for bent welding torch or straight welding torch
    10.Needed welding length Front-end:127mm; end:127mm
    11.Self-stop function By spacing parts of front-end and after end.

    Working Panel:

    1)  Power indicated lamp: When the power is on, the lamp is light.[/caption]

    2) Speed  control  knob:  Increase  speed  when  you  revolve  clockwise,  decrease  speed  when revolve anti-clockwise.

    Speed  scale  matches  following  speed  chart:  Adjust  the  welding  speed  according  to  welding specifications.

    3)  Stop  button:Press  down the  button  and the trolley stop walking. The selector switch can control whether the welding stops.

    4)    Walking guide and power switch: The switch is used to control welding guide and power.

    5)     Start button:Press down the button and the trolley begin to walk. The selector switch can control whether welding begins at the same time.

    6)     Model select switch—there are three positions. The individual function is :

    TEST:On this  position, the feeder works. You  can  control  arc starting/  retracting  arc  by  your hands, then reset after release.

    ARC ON:On this position, the normal welding begins. If you press down firing switch, the trolley starts to walk at the time of arc starting.

    NEUT:On this position, if you press down start button, the trolley walks but the welding doesn’t start.

    Corner Welding Carriage

     


      Custom Containers FAQs

      A Qigao é líder em máquinas de solda e corte por chama na China. Insistimos no fornecimento de tecnologia profissional, alto desempenho e bom serviço pós-venda para atender às exigências de clientes de todo o mundo. A China Qigao fará o possível para se tornar seu fornecedor único. Informe sua tarefa detalhada e encontraremos uma solução juntos!

      Essa máquina de corte a gás de chama oxicombustível é bem utilizada na construção naval, produção de petróleo, metalurgia, estrutura metálica e outros fabricantes, etc.

      Diferentes tamanhos de pontas de corte, diferentes espessuras de corte. Primeiro, confirme a espessura de corte necessária e, em seguida, selecione os bicos de corte correspondentes. Veja abaixo os parâmetros detalhados das pontas G02 (acetileno) e G03 (propano).

      TipoNão.Corte a gás
      abertura (mm)
      Corte
      Espessura (mm)
      Velocidade de corte
      (mm/min)
      Oxigênio
      pressão (Mpa)
      Acetileno
      pressão (Mpa)
      Acetileno
      GO₂
      #000.85-10600-4500.2-0.3>0.03
      #01.010-20480-3800.2-0.30.03
      #11.220-30400-3200.25-0.350.03
      #21.430-50350-2800.25-0.350.03
      #31.650-70300-2400.3-0.40.04
      #41.870-90260-2000.3-0.40.04
      #5290-120210-1700.4-0.60.04
      #62.4120-160180-1400.5-0.80.05
      #72.8160-200150-1100.6-0.90.05
      #83.2200-28090-600.6-1.00.05
      #93.6270-35090-600.7-1.10.05
      #104350-40070-500.7-1.20.06

       

      Tipo

      Não.

      Corte a gás
      abertura (mm)

      Corte
      Espessura (mm)

      Velocidade de corte
      (mm/min)

      Oxigênio
      pressão (Mpa)

      Acetileno
      pressão (Mpa)

      Propano
      GO3

      #0

      0.7

      5-10

      800-450

      0.2-0.3

      >0.03

      #1

      0.9

      10-20

      480-300

      0.2-0.3

      0.03

      #2

      1.2

      20-35

      400-320

      0.3-0.4

      0.03

      #3

      1.5

      35-60

      350-280

      0.3-0.4

      0.03

      #4

      1.8

      60-90

      300-240

      0.4-0.6

      0.04

       

      #5

      2.1

      90-130

      260-200

      0.4-0.6

      0.04

      #6

      2.5

      130-180

      220-180

      0.4-0.6

      0.04

      #7

      2.7

      180-250

      200-160

      0.5-0.7

      0.05

      #8

      3.1

      250-330

      180-140

      0.5-0.7

      0.05

      #9

      3.5

      330-380

      130-90

      0.6-0.8

      2.05

      #10

      4.0

      380-450

      90-50

      0.6-0.8

      0.05

      Sim, elas podem. Nossas máquinas padrão são equipadas com peças circulares para fazer cortes circulares extras, incluindo sua função principal de corte em linha reta. Além disso, o corte a plasma também está disponível.

      A principal diferença entre a CG1-30A e a CG1-30B é o trilho de trabalho. O 30A tem o trilho "H" e o 30B tem o trilho com furo. Você pode selecionar o trilho desejado antes de confirmar o pedido. Se o trilho for diferente, o preço será diferente.

      Soldadores MIG, soldadores TIG, soldadores MMA, máquinas de solda a ponto manual, carro de solda e máquinas de solda a ponto portáteis, máquinas de solda de pinos e assim por diante.

      Qual é o tempo de garantia das máquinas de soldagem e corte?

      Customers Also Searched

      Professional supplier of gas cutting machines, pipe gas cutter, oxy-fuel cutting machines, CNC plasma cutting machine, welding rod oven, beveling machine and welding machines supplier in China.Here Are A Few Options You Can Use Alternatively.

      pt_BRPortuguese

      Obter cotação personalizada

      Tem alguma dúvida? Entre em contato imediatamente usando o formulário abaixo.
      Nossa equipe de suporte ao cliente entrará em contato com você em breve.


        Obter cotação personalizada